Menu

D385 50Hz Specifications
  Part No. 4037090
  Power 2 Outlets: 5.5 Amps Each, 230 VAC Each
11 Amps Total Power Consumption
  Water
  Removal
55 Liters (116 Pints)/Day @ AHAM (80°F, 60%)
  Blower 544 m3/hr (320 CFM) Process Airflow
102 m3/hr (60 CFM) Reactivation Airflow
  Operating
  Range
-12°C to 60°C
  W x H x D 24-1/4″ x 40″ x 21-3/8″
  Weight 105 Lbs.

Phoenix D385 Desiccant Dehumidifier 50Hz

Low Grains, Wide Operating Range

The Phoenix D385 provides the perfect combination of features and performance for the restoration professionals. Ingeniously designed to operate vertically or horizontally, the Phoenix D385 provides the wide operating range and ultra-low grains of a desiccant with the water removal capacity of the largest LGRs.

The Phoenix D385 is not like the “toy” portable desiccant dehumidifiers that lack real capacity. The D385 delivers 320 CFM (544 m3/hr) of ultra-low grain process air. The true four hole configuration allows the Phoenix D385 to be located in the affected area with the 60 CFM (102 m3/hr) re-activation air stream isolated from the drying chamber. The D385’s four hole design allows the restoration contractor to set-up for effective positive, neutral or negative pressure operation.

Designed to operate vertically or horizontally, the D385 will fit inside most crawlspaces. Having the D385 securely inside, rather than outside the crawlspace access, avoids the possibility of someone tampering with the unit.

The Phoenix D385 is easy to transport and set-up. The D385 will fit on your truck in the areas already designed for your LGRs and will move on to the jobsite with the same portability. All the power to the unit is provided by two 230 volt grounded power cords. Simply plug the cords into separate 10 amp outlets. Each cord draws only 5.5 amps to power the D385. The re-activation air stream is ducted through 6” (15.25cm) flex duct provided with the unit and stores conveniently in the top of the unit.

The Phoenix D385 makes it possible for every restoration contractor to add the ultra-low grain performance of a desiccant with real water removal capacity to their equipment fleet.

Features:

  • Operates vertically or horizontally
  • Wide operating range
  • Process airflow 320 CFM (544 m3/hr)
  • Reactivation airflow 60 CFM (102 m3/hr)
  • 55L (116 pints) water removal per day at AHAM
  • Ultra low grains
  • Two 7 meter (23’) power cords:
        Each 230-240/50 Hz
        5.5 Amps per cord
        11 Amps/230 Volts total
  • Unlimited ducting possibilities
  • Legendary stainless construction