Phoenix R175 LGR Spec Sheet Phoenix R175 LGR Manual R175 Specifications Part No. 4029200 Power 6.3 Amps, 110–120 VAC Water Removal 92 Pints/Day @ AHAM 21 Gal./Day @ Saturation Blower 230 CFM Operating Range 33°F to 110°F W x H x D 20″ x 33.5″ x 20″ Weight 105 Lbs. Xactimate Code WTRDHM> Rate/Day $73.13 MSRP $1,999 All Rotomold LGR Dehumidifiers LGR Dehumidifier Spec Chart Phoenix Layflat Duct Specifications Material: Blown Film Resin Length: 250 Feet (76.2 m) Melting Point: 249°F (121°C) Phoenix R175 LGR Dehumidifier Compact Design, Big Performance The Phoenix R175 LGR Dehumidifier combines our Proven Performance into a compact, state of the art, roto-mold design. The R175 reflects all the ingenuity and engineering expertise that is expected in Phoenix name-brand equipment. Efficient design results in the R175 removing 30% more water (92 pints at AHAM) than competitive LGR units of similar size, while drawing only 6.3 amps of power. The Phoenix reputation for performance is continued in the R175’s excellent grain depression and operating range. Watch All R175 Service/Maintenance Videos The new solid state control panel features a lighted hour meter, pump purge control and a defrost light. The hour meter can be activated for ten seconds when the unit is unplugged to log the status of the unit in the warehouse or on the truck. The sturdy telescoping handle provides sure control and retracts for storage. The recessed 12-inch wheels, compact design and balanced weight distribution make the R175 the most maneuverable dehumidifier in the restoration industry. The rugged roto-mold housing resists dents and dings and the granite pigments hide scuffs and scratches. The body also features chamfered corners to prevent damage to walls and woodwork while maneuvering on the job-site. Phoenix attention to detail and fore-thought are evident in the R175’s ability to “nest” one upon another, or securely be “layered” with plywood. An area to accept a company label or identification is located below the R175 emblem. Notched surfaces for tie-down straps and multiple lift points were also included. Like every Phoenix, the R175 features effective air filtration with a pleated media MERV-7 filter standard (optional MERV-11 is available). Multiple ducting options are available with 12-inch intake duct tabs on the lid and a wire duct collar for 10-inch lay-flat duct. The outlet grill is configured to accept a variety of thermo-hygrometer probes (e.g. Vaisala, Humiport, etc.) for taking accurate psychrometric readings. The 20-foot power cord and 33-foot condensate hose store conveniently inside the hinged stainless steel lid. The R175 marks Phoenix Restoration Equipment’s entry into the manufacturing of roto-mold LGR dehumidifiers proving our commitment to technology, performance, and durability.