Phoenix Stackable CAM Spec Sheet Phoenix Stackable CAM Manual Phoenix Stackable CAM Pro Manual Stackable Centrifugal Air Mover Specifications Part No. 4030980 Power 2.0L/2.6H Amps, 115 VAC Blower 1,050 CFM W x H x D 17.25″ x 20″ x 19.4″ Weight 27 Lbs. MSRP $316 Stackable Centrifugal Air Mover Pro Specifications Part No. 4030990 Power 2.0L/2.6H Amps, 115 VAC Blower 1,050 CFM W x H x D 17.25″ x 20″ x 19.4″ Weight 27 Lbs. MSRP $352 All Air Movers For Info on the Stackable CAM 50Hz Phoenix Stackable CAM and CAM Pro Lower Amps, Higher CFM, Stacks 4 High – The New Stackable CAM and CAM Pro from Phoenix The Phoenix Stackable CAM and Phoenix Stackable CAM Pro utilize an innovative stable, stackable design. With multiple contact points and interlocking side grills, the Phoenix Stackable CAM Pro can be stacked safely and securely up to 4 units high, freeing up valuable space in your trucks and warehouses. The Phoenix Stackable CAM and CAM Pro feature a unique 1/3 horsepower motor design and proprietary blower technology, that provides more airflow, higher static pressure, and lower amp draw. At 1050 CFM, over 2800 FPM, and using only 2.6 amps the Phoenix Stackable CAM and CAMPro deliver 12% more CFM, while drawing 35% less electricity than the leading competitive centrifugal on both High Speed and Low Speed (2.0 amps on low).With the low amp draw and onboard GFCI, the Phoenix Stackable CAM Pro gives you maximum airflow on a circuit, allowing up to 4 CAMs on a standard 15 amp household circuit (or up to 6 on low speed). The Phoenix Stackable CAM housing is durable, washable, and chemical resistant. It features multiple operating positions of horizontal, vertical, and 45-degree angles. Like all Phoenix air movers, the Stackable CAM and CAM Pro are ETL Listed and UL Certified. The Phoenix Stackable CAM is lightweight and properly balanced for easy handling and features the additional convenience features of a lighted plug for confirming power at the outlet and superior cord management for better, packing and storage.