Phoenix

4800

Industrial Desiccant Series

Built with the Restorer in Mind

Category:

Xactimate

WTRDHMDT5K

Code

4800

Process CFM

3032

Pints/day

106

Amps

The Phoenix 4800 Industrial Desiccant Dehumidifier is built with the restorer in mind. The 4800 has two truly exceptional features, which are its ease of use and its reliability on the job site. The robust construction is designed to withstand the rigorous conditions of water damage restoration, shipyards, off- and onshore petrochemical facilities, manufacturing plants, and the general rental industry.

The Phoenix 4800 is constructed primarily of lightweight aluminum for maximum strength and corrosion resistance. Over 15 years of manufacturing experience have been incorporated into this tough new weather resistant design and high capacity performance. The 4800 removes over 3,000 pints of water per day at AHAM and has an operating range of -10ºF to 140ºF. The 4800 is equipped with a reactivation temperature sensor that controls the amount of heat going into the rotor so that the desiccant is always operating under optimum conditions.

Product Specifications

Part Numbers
4034830 (With Frame)
4034820 (Without Frame)
4034850 (With Frame Docking)
4034840 (Without Frame Docking)
Power
480 Volt Three-Phase Unit
106 Amps
Water Removal
3032 PPD (175 LPD) at 80°F/60% RH (AHAM)
CFM
4800 CFM Process Airflow
Filter
Pleated 20” x 20” x 2” Media MERV 11 (Process)
Pleated 9” x 11 3⁄8” x 1⁄4” Media MERV 11 (Reactivation)
Ducting Options
Heavy Duty PVC/Polyester Duct 20” x 25’ 6” Pitch
Heavy Duty PVC/Polyester Duct 20” x 25’ 4” Pitch
NOTE: Duct with 4” pitch is mandatory for the return duct if you are recirculating.
Cord Length
Power Cords Not Included
Unit Dimensions
Width: 48”
Height: 66”
Depth: 120”
Weight: 1,550 Lbs.
Operating Range
-10°F to 140°F
Xactimate Code
WTRDHMDT5K
Rate/Day
$1,560